Vacuum handling wood

Vacuum lifters for the manipulation of flat, commercial wood panels, door panels or special lifting devices for applications in the wood processing industry.

UniWood Lifter Series

Our standard lifters for the wood handling.

Our standard lifter series for most commonly used wood board materials. Next to their lightweight and compact build these lifters convince with great ergonomics and maximum safety.

 

Your benefits at a glance

With its 90 ° tilting function, our UniWood UWL 3 is particularly versatile in the field of wood production, as boards can be manipulated both upright and horizontal. The lifter also impresses with its light, slim design and particularly easy operation. In addition to most commonly used coated wood materialsm, the UniWood UWL 3 is also ideal for handling air-permeable panels (OSB, chipboard, MDF over 8 mm thickness) and materials with a slightly textured surface.

 

BROCHURE

Do you need more information or would you like a quote?

 

Other features

  • Adjustable control handle
  • compact design and low build height
  • Load capacity: max. 250 kg
  • Special operation handle for one-hand operation
  • Hoist: continuously, max. 10 m/min.

The perfect combination of Barbaric.

As a complete solution, we also offer our lifters together with the matching craneway system or pillar jib crane as well as various beams with many variations depending on application (details at the end of the page).

Technical changes and errors excepted.

Panel handling made easy

With its slim and compact design with low mass the UniWood UWL 3 S is ideal for quick handling of plates on all processing machines. The load suspension with only one suction cup allows the lifting of parts of all sizes. Also structured and glossy surfaces can be gripped easily and without damage. Included is a 90° tilting device for vertical picking up and placement of the parts.

 

BROCHURE

Do you need more information or would you like a quote?

 

Universally applicable

With this system, the feeding of edgebanders and stationary panel saws with only one operator is possible.

The UniWood UWL 3 S is an ideal complement for handling of large special parts that can not be transported by the standard return system.

  • Load capacity: max. 150 kg
  • Special operation handle for handling by one hand
  • Hoist: continuously, max. 10 m/min.

The perfect combination of Barbaric.

As a complete solution, we also offer our lifters together with the matching craneway system or pillar jib crane as well as various beams with many variations depending on application (details at the end of the page).

Technical changes and errors excepted.

Your benefits at a glance

Our UniWood UWL 1 is particularly versatile in the field of wood production. Boards can be manipulated both either upright or horizontal. The lifter also impresses with its light, slim design and particularly easy operation. In addition to most commonly used coated wood materialsm, the UniWood UWL 1 is also ideal for handling air-permeable panels (OSB, chipboard, MDF over 8 mm thickness) and materials with a slightly textured surface.

 

BROCHURE

Do you need more information or would you like a quote?

 

Other features

  • Adjustable control handle
  • compact design and low build height
  • Load capacity: max. 250 kg
  • Special operation handle for one-hand operation
  • Hoist: continuously, max. 10 m/min.

The perfect combination of Barbaric.

As a complete solution, we also offer our lifters together with the matching craneway system or pillar jib crane as well as various beams with many variations depending on application (details at the end of the page).

Technical changes and errors excepted.

Panel handling made easy

With its slim and compact design with low mass the UniWood UWL 1 S is ideal for quick handling of plates on all processing machines. The load suspension with only one suction cup allows the lifting of parts of all sizes. Also structured and glossy surfaces can be gripped easily and without damage.

 

BROCHURE

Do you need more information or would you like a quote?

 

Universally applicable

With this system, the feeding of edgebanders and stationary panel saws with only one operator is possible.

The UniWood UWL 1 S is an ideal complement for handling of large special parts that can not be transported by the standard return system.

  • Load capacity: max. 150 kg
  • Special operation handle for handling by one hand
  • Hoist: continuously, max. 10 m/min.

The perfect combination of Barbaric.

As a complete solution, we also offer our lifters together with the matching craneway system or pillar jib crane as well as various beams with many variations depending on application (details at the end of the page).

Technical changes and errors excepted.

Characteristics

  • Tilting of parts 180° horizontal
  • Continously variable tilting speeds
  • Complete handling system with lifting gear
  • One-handed operation through ergonomic handle
  • Continous and smooth movements
  • Manual adjustment of the center of gravity

BROCHURE

Do you need more information or would you like a quote?

 

Technical data

  • Load capacity: 220 kg / 250 kg
  • Tilting speed: approx. 6 sec./90°
  • Size of sution cups: 4x or 6x 377 x 81 mm, Special versions on request
  • Lifting speed: 0-10 m/min continously variable through frequency converter
  • Lifting height: approx. 2.0 m
  • Operating voltage: 230 V / 50 Hz

The perfect combination of Barbaric.

As a complete solution, we also offer our lifters together with the matching craneway system or pillar jib crane as well as various beams with many variations depending on application (details at the end of the page).

Technical changes and errors excepted.

Special Lifters

We offer special lifting equipment for many special applications in woodworking and processing. Contact us for solutions for your special application.

 

Your benefits at a glance

  • No more damages through rough manipulation – unique manipulation possibilities for windows, doors, glass panels, metal frames, cladding parts, stone panels…
  • Clamping parts with 50-150mm thickness with adjustable clamping pressure
  • Lifiting speed continously variable
  • Most flexible gripping system for universal application
  • Maximum load of 500 kg

Technical changes and errors excepted.

BROCHURE

Do you need more information or would you like a quote?

 

Your benefits at a glance

The special lifting device for moving whole posts, KVH, sections such as squadrons or rough sawn boards by a server. Delivery incl. chain hoist or for hooking into an on-site hall crane. Power supply by supply to the customer‘s indoor crane (400 V, 3 phases) due to the built-in transformer possible. Thus, no additional cable is necessary. The control can be carried out via a control handle, wired or by radio.

Technical data

  • Load capacity: up to 1500 kg
  • Operating voltage: 230 V / 50 Hz or (400 V / 50 Hz via transformer)
  • Functions are displayed by means of lamps and pressure gauges

Special solutions, for example: Control via customer crane operation and higher working loads on request.

BROCHURE

Technical changes and errors excepted.

Do you need more information or would you like a quote?

 

Brand new, innovative and functional.

With our new NeedleGripper, we offer needle gripper lifters for handling wood fiber and other lightweight and insulating materials. Our NeedleGripper NGR are thus ideally suited for all handling applications in the field of prefabricated house construction and the production of insulating materials. Due to the clever design, the lifter can also be used to lift coated panels using our proven suction pads.

Characteristics

  • Equipped with needle grippers for wood fiber panels as well as suction cups for regular wood panels
  • Effortless handling of wood fiber panels up to 65 kg and regular wood panels up to 100 kg
  • Handling controls is integrated in the handle
  • Infinitely variable lifting speed control of chain hoist
  • Flexible adjustment of suction traverse and handling arm
  • Optional 180° Rotation Function

Technical changes and errors excepted.

BROCHURE

Do you need more information or would you like a quote?

 

Design

  • rail system with dual bridge construction
  • lift mast rotating 360°
  • lightweight aluminium profiles as carriage guideways
  • special lifting traverse for panel separation

Electrical control

All control elements are located in our unique control handle. Separate holds on the framework are used for manipulator guiding and rotating.

Optional features

  • Increased load capacity to 250 kg
  • Vacuum generation: by ejector (6 bar compressed air required)
  • Endless turning of the lifting mast
  • Electrically driven crane bridge
  • Pneumatic brake for turntable (6 bar compressed air required)
  • Custom made beams
  • Electric turning 90 °

BROCHURE

Do you need more information or would you like a quote?

 

Security features

The system is equipped with a security unit avoiding unintentional release of the load. Panels only can be released when the weight of the panel is supported by the rack shelf or another plain surface. For additional safety a pressure gauge and an alarm horn are installed on the device.

 

Technical data

  • Load capacity: max. 100 kg
  • Lifting speed: max. 10 m/min (continously variable due to frequency conversion)
  • Vacuum generation: with electrical vacuum pump (25 m³/h)
  • Operating voltage: 230 VAC / 50 Hz
  • Tilting device: 90°
  • Rotating device: 90° (manual rotation)
  • Span: up to 12 m
  • Lifting height: up to 8 m
  • Lifting mast: 360° rotatable, not endless
  • Display on the operating handle - camera mounted on the lifting carriage

    Technical changes and errors excepted.

    Special beams and suction traverses

    We offer a suitable lifting beam for every application.

    With 4 suctions cups Ø 270 mm on an adjustable beam (beam size: 1500 x 800 mm) for thin dense boards, PVC, aluminium, metal, melamine. Not suitable for MDF and permeable chipboard panels.

     

    BROCHURE

    Do you need more information or would you like a quote?

     

    With 4 oval suction cups 377 x 81 mm on an adjustable beam - Spreader for doors with glass section (beam size 1500 x 1200 mm).

     

    BROCHURE

    BROCHURE

    Do you need more information or would you like a quote?

     

    With 8 bellow suction cups Ø 115 mm on an adjustable beam – Suction beam with extra length for thin parts. (beam size: 2500 x 1200 mm). The outer suction cups are lockable for lifting of smaller plates.

    Crane- and craneway systems

    Combining high performance with ease of use. Our crane systems are specifically designed and built for handling tasks.

    Slewing crane systems in lightweight construction for all working loads and arm lengths. On request with enlarged mounting plate.

    BROCHURE

    Do you need more information or would you like a quote?

     

    Our lightweight aluminium craneway system for manual operation allows track gauges of up to 8 m. All trolleys with guide rollers on the side.

     

    BROCHURE

    Do you need more information or would you like a quote?

     

    Our lightweight aluminium craneway system for manual operation allows track gauges of up to 20 m and working loads of up to 500 kg – combining high performance with maximum ease of use.

     

    BROCHURE

    Do you need more information or would you like a quote?

     

    Our sales team is there for you!

    If you have any questions or would like a quote, please contact us.

    Phone: +43 732 779800
    Email: sales-manual@barbaric.at

    our team

     

    Barbaric Service

    We are there for you - even years after the sale.

    In order to ensure that our handling systems function optimally, we rely on good cooperation with our customers and particularly customer-oriented support through our competent service team. 

    Overview Service

    Our products

    Manual vacuum lifters from Barbaric enable efficient handling of heavy wood and glass panels and save valuable time in production. While conventional manipulation by hand requires 2-3 employees, a vacuum lifting systems allows a single employee to move oversized panels with maximum ergonomics and without physical exertion.

    Our automatic handling solutions take over fully automated process steps in wood panel and part production. Panel storage and retrieval systems, feeding systems, buffer storage and return systems are just a few examples of modern systems in the field of material handling. All of our machines are built individually according to the requirements of our customers, while proven handling concepts and trusted components are used.

    Product overview